Simply put, you need to upgrade the configuration of the single-cooling air conditioner to the configuration of the heating and cooling air conditioner. Under normal circumstances, the cost of modification is not low.
1. First, add fluoride again (it is affirmative);
2. Add "four-way valve and one-way valve" to the outdoor unit condenser;
3. When necessary, add a set of "auxiliary electric heating" system to the indoor unit (the effect will be better);
4. The original cooling and electric control board should be replaced with a "cooling and heating electric control board". In order to reduce the cost, a "modified board" can be used;
5. The indoor and outdoor connection lines also need to be modified (according to the site conditions, the four-way valve needs to be energized);
6. Modification must be carried out on the basis of the idea of no hidden dangers, especially the auxiliary electric heating part, that is, the matching of the electric power and the power cord must be considered, and the "heat insulation during fixation" must be considered;
Previous:
How to clean the air conditioner?
Next:NO! |
Back to list |
Products Recommended
The main products of our factory: side blower, ring blower, compound air-conditioning unit, textile dust removal equipment and various air-conditioning componentsWhat should I do if the internal unit of the wall-mounted air conditioner drips?
2021-07-121. The exchanger dripsThe internal unit of the air conditioner is overheated, and the exchanger in the internal unit is d…Key points for installation of compound air-conditioning unit
2021-07-121. The combined air-conditioning unit can be installed on a concrete platform or a base made of section steel. The height…How to properly use air conditioning for heating?
2021-07-12Set a reasonable temperature:In winter, the air conditioner temperature can be reduced by 2 degrees to save more than 10%…The correct operation steps for installing the shutters of the outside air conditioner
2021-07-121. The construction personnel who install zinc-steel shutters must be those who have received relevant operation training…Address: No. 12, Tianjin Road, Economic Development Zone, Xinyi City, Jiangsu Province
Phone: +86-0516-88865398
Mobile: +86-138-0522-5976
Fax: +86-0516-88865398
Email: xfkt2007@163.com